Configuring ISP information

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Create an ISP and enter ISP view.

loadbalance isp name isp-name

By default, no ISPs exist.

3. Specify the IP address for the ISP.

  • Specify an IPv4 address:ip address ipv4-address { mask-length | mask }

  • Specify an IPv6 address:ipv6 address ipv6-address prefix-length

Use either method or both methods.

By default, no IPv4 or IPv6 address is specified for the ISP.

An ISP does not allow overlapping network segments.

4. (Optional.) Set a description for the ISP.

description text

By default, no description is set for the ISP.