Configuring health monitoring
Perform this task to enable health monitoring to detect the availability of a link.
The health monitoring configuration in link view takes precedence over the configuration in link group view.
To configure health monitoring:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter link view. | loadbalance link link-name | N/A |
3. Specify a health monitoring method for the link. | probe template-name | By default, no health monitoring method is specified for a link. |
4. Specify the health monitoring success criteria for the link. | success-criteria { all | at-least min-number } | By default, the health monitoring succeeds only when all the specified health monitoring methods succeed. |