Configuring health monitoring
Perform this task to enable health monitoring to detect the availability of links.
The health monitoring configuration in link view takes precedence over the configuration in link group view.
To configure health monitoring:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter link group view. | loadbalance link-group link-group-name | N/A |
3. Specify a health monitoring method for the link group. | probe template-name | By default, no health monitoring method is specified for a link group. |
4. Specify the health monitoring success criteria for the link group. | success-criteria { all | at-least min-number } | By default, health monitoring succeeds only when all the specified health monitoring methods succeed. |