Scheduling a load balancing test
Perform this task in any view to test the load balancing result.
To schedule a load balancing test:
Task | Command |
|---|---|
Schedule an IPv4 load balancing test (in standalone mode). | loadbalance schedule-test ip protocol { protocol-number | icmp | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port |
Schedule an IPv4 load balancing test (in IRF mode). | loadbalance schedule-test ip protocol { protocol-number | icmp | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port [ slot slot-number ] |
Schedule an IPv6 load balancing test (in standalone mode). | loadbalance schedule-test ipv6 protocol { protocol-number | icmpv6 | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port |
Schedule an IPv6 load balancing test (in IRF mode). | loadbalance schedule-test ipv6 protocol { protocol-number | icmpv6 | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port [ slot slot-number ] |