Configuring a forwarding LB action
Configuring the forwarding mode
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter generic LB action view. | loadbalance action action-name | N/A |
3. Configure the forwarding mode. | forward all | By default, the forwarding mode is to discard packets. |
Specifying a primary server farm
When the primary server farm is available (contains available real servers), the primary server farm is used to guide packet forwarding. When the primary server farm is not available, the backup server farm is used to guide packet forwarding.
To specify a primary server farm:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter LB action view. | loadbalance action action-name | N/A |
3. Specify a primary server farm. | server-farm server-farm-name [ backup backup-server-farm-name ] [ sticky sticky-name ] | By default, no primary server farm is specified. |
Matching the next rule upon failure to find a real server
Perform this task to enable packets to match the next rule in an LB policy when no real servers are available for the current LB action.
To match the next rule upon failure to find a real server:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter LB action view. | loadbalance action action-name | N/A |
3. Match the next rule upon failure to find a real server. | fallback-action continue | By default, the next rule is not matched when no real servers are available for the current LB action. |