Enabling per-packet load balancing for UDP traffic
By default, the LB device distributes traffic matching the virtual server according to application type. Traffic of the same application type is distributed to one real server. Perform this task to enable the LB device to distribute traffic matching the virtual server on a per-packet basis.
To enable per-packet load balancing for UDP traffic:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter UDP virtual server view. | virtual-server virtual-server-name | N/A |
3. Enable per-packet load balancing for UDP traffic for the virtual server. | udp per-packet | By default, per-packet load balancing for UDP traffic is disabled for the virtual server. |