Enabling SNMP notifications for redundancy groups
This feature enables SNMP notifications for the following events:
A manual switchover is performed.
An interface goes down.
A faulty interface is recovered.
To send the event notifications to an NMS, you must also configure SNMP as described in Network Management and Monitoring Configuration Guide.
To enable SNMP notifications for redundancy groups:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable SNMP notifications for redundancy groups. | snmp-agent trap enable rddc | By default, SNMP notifications are enabled for redundancy groups. |