Configuring switchover timers
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter redundancy group view. | redundancy group group-name | N/A |
3. Set the hold down timer for the redundancy group. | hold-down-interval second | By default, the hold down timer is 1 second for the redundancy group. |
4. Set the preemption delay timer for the redundancy group. | preempt-delay min | By default, the preemption delay timer is 1 minute for the redundancy group. If you set this timer to 0 seconds, automatic switchover is disabled. |