An error prompt is displayed

An error prompt "The virtual router detected a VRRP configuration error." is displayed during configuration.

This symptom is probably caused by the following reasons:

• The VRRP advertisement interval in the packet is not the same as that for the current VRRP group (in VRRPv2 only).

• The number of virtual IP addresses in the packet is not the same as that for the current VRRP group.

• The virtual IP address list is not the same as that for the current VRRP group.

• A device in the VRRP group receives illegitimate VRRP packets. For example, the IP address owner receives a VRRP packet with the priority 255.

To resolve the problem:

1. Modify the configuration on routers in VRRP groups to ensure consistent configuration.

2. Take fault location and anti-attack measures to eliminate potential threats.

3. If the problem persists, contact Hewlett Packard Enterprise Support.