Disabling an IPv4 VRRP group

You can temporarily disable an IPv4 VRRP group. After being disabled, the VRRP group stays in initialized state, and its configurations remain unchanged. You can change the configuration of a VRRP group when the VRRP group is disabled. Your changes take effect when you enable the VRRP group again.

To disable an IPv4 VRRP group:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

N/A

3. Disable a VRRP group.

vrrp vrid virtual-router-id shutdown

By default, a VRRP group is enabled.