Specifying an IPv4 VRRP operating mode

A VRRP group can operate in either of the following modes:

After an IPv4 VRRP operating mode is configured on a router, all IPv4 VRRP groups on the router operate in the specified operating mode.

To specify an IPv4 VRRP operating mode:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Specify an IPv4 VRRP operating mode.

  • Specify the standard mode:undo vrrp mode

  • Specify the load balancing mode:vrrp mode load-balance [ version-8 ]

By default, VRRP operates in standard mode.