traffic-shaping adaptation percentage

Use traffic-shaping adaptation percentage to set the rate adjustment percentage for FRTS adaptation.

Use undo traffic-shaping adaptation percentage to restore the default.

Syntax

traffic-shaping adaptation percentage number

undo traffic-shaping adaptation percentage

Default

The rate adjustment percentage for FRTS adaptation is 25%.

Views

FR class view

Predefined user roles

network-admin

Parameters

number: Specifies the rate adjustment percentage, in the range of 1 to 30.

Usage guidelines

When rate adjustment is triggered, the router reduces or increases the traffic rate by the set percentage of the current rate. The adjusted rate must be between the CIR and the CIR ALLOW. For example, the current rate is 3000 bps, the rate adjustment percentage is 20%, and the CIR is 2500 bps. The rate is reduced to 2400 bps (3000 – 3000 x 20%). Because the adjusted rate cannot be lower than the CIR, the adjusted rate should be 2500 bps.

Examples

# Set the rate adjustment percentage to 20%.

<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] traffic-shaping adaptation 20

Related commands

fr traffic-shaping