Configuring reverse charging
This feature enables the router to identify a reverse-charge call by comparing the called number of an incoming call with a prefix. If the called number matches the prefix, the router interacts with the PBX device to charge the called party.
To configure reverse charging:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter digital voice interface view. | subscriber-line line-number:{ ts-set-number | 15 | 23 } | N/A |
3. Configure a prefix for reverse charging. | reverse-charge prefix string | By default, no prefix for reverse charging is configured. |