Creating a timeslot set
After you create a timeslot set and configure its signaling type on an E1 interface, the system automatically creates a logical digital voice interface. Timeslot 0 is used for frame synchronization, timeslot 16 is used to transmit signaling, and the other 30 timeslots are used to transmit voice packets.
A T1 interface is used in a similar way to an E1 interface, except that it has 24 timeslots and timeslot 24 is used to transmit signaling.
Only RS signaling can be configured for a timeslot set.
To create a timeslot set:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter E1 or T1 interface view. | controller { e1 | t1 } number | N/A |
3. Create a timeslot set and enable R2 signaling for it. | timeslot-set ts-set-number timeslot-list timeslots-list signal r2 | By default, no timeslot sets exist. |