Enabling E&M call logging
E&M call logging enables the device to log call events on E&M interfaces and send the log message to the information center. With the information center, you can set log message filtering and output rules, including output destinations. For more information about using the information center, see Network Management and Monitoring Configuration Guide.
To enable E&M interface logging:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter voice view. | voice-setup | N/A |
3. Enable E&M call logging. | em log enable | By default, E&M call logging is disabled. |