[x]

Configuring an FXO interface > Enabling online monitoring

 

 Next

Enabling online monitoring

This feature monitors the physical states of all FXO interfaces on the device.

If this feature is disabled, the device does not detect the physical states of FXO interfaces. All FXO interfaces are always shown in up state.

To enable online monitoring:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter voice view.

voice-setup

N/A

3. Enable online monitoring.

monitor enable

By default, online monitoring is enabled.

prev

 

up

 next

Configuring the packet loss compensation mode 

home

 Binding an FXS interface to an FXO interface

© Copyright 2017 Hewlett Packard Enterprise Development LP