Configuring call progress tones
Perform this task to configure call progress tones for all voice interfaces on the device.
To configure call progress tones:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter voice view. | voice-setup | N/A |
3. Configure call progress tones. |
| By default, the call progress tones of China are used. |
4. Configure the amplitude value for call progress tones. | cptone tone-type { all | busy-tone | congestion-tone | dial-tone | ringback-tone | special-dial-tone | waiting-tone } amplitude value | Defaults are:
|