Configuring IPoEoA
Follow these guidelines when you configure IPoEoA:
In an IPoEoA application, configure the IP address for VE interfaces instead of ATM interfaces. The IP address configuration does not take effect on ATM interfaces.
In an IPoEoA application, configure Class Based Queuing (CBQ) on PVCs or PVC groups.
Perform this task to enable a PVC or PVC group to carry Ethernet packets.
To configure IPoEoA:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a VE interface. | interface virtual-ethernet interface-number | N/A |
3. Return to system view. | quit | N/A |
4. Enter ATM interface view or ATM subinterface view. | interface atm { interface-number | interface-number.subnumber } | N/A |
5. Enter PVC view or PVC group view. |
| N/A |
6. Configure an IPoEoA mapping. | map bridge virtual-ethernet interface-number | By default, no mappings exist. This command references the VE interface previously created. |