Configuring a PVC
In PVC mode, the network administrator configures the switching entries and assigns VPI/VCI values. You can configure the PVCs by using the assigned VPI/VCI values. If the ATM interfaces of two ATM devices are directly connected, you must configure the same VPI/VCI values for the interfaces.
To configure a PVC:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter ATM interface view or ATM subinterface view. | interface atm { interface-number | interface-number.subnumber } | N/A |
3. Create a PVC and enter PVC view. | pvc { pvc-name [ vpi/vci ] | vpi/vci } | By default, no PVCs exist. |
4. Bring up the PVC. | undo shutdown | By default, the PVC is up. |