Configuration procedure

To configure a number sending mode:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter voice view.

voice-setup

N/A

3. Enter voice dial program view.

dial-program

N/A

4. Enter POTS voice entity view.

entity entity-number pots

N/A

5. Configure a number sending mode.

send-number { digit-number | all | truncate }

By default, the truncate mode is used.

6. Bind a number template to the local voice entity.

match-template match-string

By default, no number template is bound to the local or trunk voice subscriber line.