Configuration procedure

To configure a number priority peer:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter voice view.

voice-setup

N/A

3. Enter voice dial program view.

dial-program

N/A

4. Configure a number priority peer.

number-priority peer enable

Optional.

By default, a number starting with an asterisk (*) or a pound sign (#) will first match against a service feature code.

After the number-priority peer enable command is configured, a dialed number will match first against a voice entity match template and then a service feature code. For example, if a service feature code is *40*1234 and the match template *40 is configured for a voice entity, *40*1234 dialed by a user will first match the number template *40 (*40 is dialed out as the called number), and the feature corresponding to the service feature code *40*1234 will not be triggered.

For more information about the configuration of feature codes, see "Configuring call services."