Mirroring PCM, RTP packets, or voice command data on a digital voice subscriber line

The mirroring function copies the specified PCM, RTP, and voice command data on a digital voice subscriber line to the specified destination. With the mirroring function, you can analyze and locate problems.

To mirror PCM, RTP, or voice command data on a digital voice subscriber line to a specified interface or destination:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter digital voice subscriber line view.	subscriber-line line-number	N/A
3. Mirror PCM, RTP, or voice command data to a specified interface or destination.	Mirror PCM or RTP data based on a calling number:mirror number number { pcm \| { in \| out \| all } data } calling calling-number to { local-interface interface-type interface-number [ mac H-H-H ] \| remote-ip ip-address [ port port ] } Mirror PCM data based on a timeslot:mirror number number pcm { bdsp \| fdsp } channel-number to { local-interface interface-type interface-number [ mac H-H-H ] \| remote-ip ip-address [ port port ] } Mirror RTP or voice command data on all timeslots:mirror number number { in \| out \| all } { command \| data } to { local-interface interface-type interface-number [ mac H-H-H ] \| remote-ip ip-address [ port port ] }	Optional. By default, no traffic is mirrored.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter digital voice subscriber line view.

subscriber-line line-number

N/A

3. Mirror PCM, RTP, or voice command data to a specified interface or destination.

Mirror PCM or RTP data based on a calling number:mirror number number { pcm | { in | out | all } data } calling calling-number to { local-interface interface-type interface-number [ mac H-H-H ] | remote-ip ip-address [ port port ] }
Mirror PCM data based on a timeslot:mirror number number pcm { bdsp | fdsp } channel-number to { local-interface interface-type interface-number [ mac H-H-H ] | remote-ip ip-address [ port port ] }
Mirror RTP or voice command data on all timeslots:mirror number number { in | out | all } { command | data } to { local-interface interface-type interface-number [ mac H-H-H ] | remote-ip ip-address [ port port ] }

Optional.

By default, no traffic is mirrored.

prev	up	next
Enabling the router to treat DISCONNECT messages with PI 8 as standard DISCONNECT messages	home	Displaying and maintaining digital voice subscriber lines