Configuration procedure
To configure a BSV BRI interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter the specified BSV BRI interface view. | interface bri interface-number | N/A |
3. Configure an interface description. | description text | Optional. By default, the description of a voice subscriber line is interface-name+interface. |
4. Enable B channel loopback detection. | loopback { b1 | b2 | both } | Optional. Not enabled by default. |
5. Set the MTU of the BSV BRI interface. | mtu size | Optional. |
6. Set the interval for sending keepalive packets. | timer hold seconds | Optional. By default, the polling interval is 10 seconds. |
7. Enable the interface to generate linkUp/linkDown traps upon link changes. | enable snmp trap updown | Optional. Enabled by default. |
8. Restore the default configuration of the BSV BRI interface. | default | Optional. |
9. Shut down the BSV BRI interface. | shutdown | Optional. The BSV BRI interface is enabled by default. |
For more information about the description, loopback, mtu, and shutdown commands, see HPE FlexNetwork MSR Router Series Comware 5 Interface Command Reference.