Configuration the time adjustment function
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter E1/T1 interface view. | controller { e1 | t1 } slot-number | N/A |
3. Create a TS set, enable digital LGS signaling and set its start mode. | timeslot-set ts-set-number timeslot-list timeslots-list signal { fxo-ground | fxs-ground | fxo-loop | fxs-ground | fxs-loop } | Optional. |
4. Quit digital LGS signaling view. | quit | N/A |
5. Enter voice subscriber line view. | subscriber-line: ts-set-number:ts-set-number | N/A |
6. Configure the dial delay. | delay start-dial value | Optional. 1 second by default. |
7. Configure the maximum time waiting for the subscriber to dial the first digit. | timer first-dial seconds | Optional. 10 seconds by default. |
8. Configure the maximum interval between any two dialed digits. | timer dial-interval seconds | Optional. 10 seconds by default. |
9. Configure the maximum time that the calling party waits for a ringback response. | timer ring-back seconds | Optional. 60 seconds by default. |