Configuring the time adjustment function

1. Enter system view.

system-view

N/A

2. Enter E1/T1 interface view.

controller { e1 | t1 } slot-number

N/A

3. Create a TS set for digital E&M signaling and select a start mode.

timeslot-set ts-set-number timeslot-list timeslots-list signal { e&m-delay | e&m-immediate | e&m-wink }

N/A

4. Exit E1/T1 interface view.

quit

N/A

5. Enter digital E&M voice subscriber line view.

subscriber-line slot-number:ts-set-number

N/A

6. Configure the maximum interval between any two digits of a dialed number.

timer dial-interval seconds

Optional.

The default is 10 seconds.

7. Configure the maximum time the calling party waits for a ringback response.

timer ring-back seconds

Optional.

The default is 60 seconds.

8. Configure the maximum time the called party waits for the first digit.

timer wait-digit { seconds | infinity }

Optional.

The default is 5 seconds.