Creating a TS set

1. Enter system view.

system-view

N/A

2. Enter T1 interface view.

controller t1 slot-number

N/A

3. Create a TS set according to the selected signaling mode.

timeslot-set ts-set-number timeslot-list timeslots-list signal { e&m-delay | e&m-immediate | e&m-wink | fxo-ground | fxo-loop | fxs-ground | fxs-loop | r2 }

By default, no TS set is configured.

4. Enter CAS view.

cas ts-set-number

N/A

5. Configure a T1 trunk routing mode.

select-mode [ max | maxpoll | min | minpoll ]

Optional.

By default, the timeslot with the lowest number is selected from all available timeslots for routing.