Configuring a TDM clock source
The TDM clock source configuration for a T1 interface is similar to that for an E1 interface. For more information, see "Introduction to TDM clock source."
To configure a TDM clock source:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter T1 interface view. | controller t1 slot-number | N/A |
3. Configure a TDM clock source for the T1 interface. | tdm-clock { internal | line [ primary ] } | Optional. By default, the internal clock is used as the TDM clock source. |