Configuring time adjustment function
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter voice subscriber line view. | subscriber-line line-number | N/A |
3. Configure the interval between off-hook and dialing the first digit. | timer first-dial seconds | Optional. The default is 10 seconds. Applicable only in FXO/FXS voice subscriber line view. |
4. Configure the maximum interval for dialing the next digit. | timer dial-interval seconds | Optional. The default is 10 seconds. |
5. Configure the maximum duration of playing ringback tones. | timer ring-back seconds | Optional. The default is 60 seconds. |
6. Configure a dial delay. | delay start-dial seconds | Optional. The default is 1 second. Applicable only in FXO/FXS voice subscriber line view. |
7. Configure the maximum duration the system waits for a digit. | timer wait-digit { seconds | infinity } | Optional. The default is 5 seconds. Applicable only in E&M voice subscriber line view. |
8. Configure the time range for the duration of an on-hook condition that will be detected as a hookflash. | timer hookflash-detect hookflash-range | Optional. By default, the time range is 50 to 180 milliseconds, that is, if an on-hook condition that lasts for a period that falls within the hookflash duration range is considered a hookflash. Applicable only in analog FXS voice subscriber line view. |