Configuration procedure

1. Enter system view.

system-view

N/A

2. Enter FXO voice subscriber line view.

subscriber-line line-number

N/A

3. Bind an FXS voice subscriber line to the FXO voice subscriber line.

hookoff-mode delay bind fxs_subscriber_line [ ring-immediately ]

By default, no FXS voice subscriber line is bound.

4. Enable the automatic dialing of the bound FXS voice subscriber line.

private-line string

Disabled by default.

5. Configure an interval between on-hook and off-hook.

timer hookoff-interval milliseconds

Optional.

The default is 500 milliseconds.

6. Exit FXO voice subscriber line view.

quit

N/A

7. Enter voice view.

voice-setup

N/A

8. Enter voice dial program view.

dial-program

N/A

9. Create a POTS entity and enter POTS entity view.

entity entity-number pots

N/A

10. Specify the FXO voice subscriber line to be exclusively used by the bound FXS voice subscriber line.

caller-permit calling-string

Optional.

By default, no calling number is configured. That is, incoming calls are not restricted.