Configuration procedure
To enable calling identity information receiving and sending:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter FXO voice subscriber line view. | subscriber-line line-number | N/A |
3. Enable calling identity information receiving for the FXO voice subscriber line. | cid receive | Optional. Enabled by default. |
4. Enable calling identity information sending for the FXO voice subscriber line. | cid send | Optional. Enabled by default. |
5. Configure the time for CID check and after the CID check, the number of rings the FXO line receives before going off-hook. | cid ring { 0 | 1 | 2 } [ times ] | Optional. By default, CID check is performed between the first and the second rings and the FXO line goes off-hook as soon as the check completes, that is, cid ring 1 0. |