Configuration procedure
This section describes the basic functions of voice subscriber lines generated by voice cards. Configurations specific to a voice subscriber line will be introduced individually.
To complete the basic functions of voice subscriber lines:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter voice subscriber line view. | subscriber-line line-number | N/A |
3. Set the expected bandwidth for the voice subscriber line. | bandwidth bandwidth-value | Optional. Support for the command depends on your device model. |
4. Configure a voice subscriber-line description. | description string | Optional. By default, the description string of a voice subscriber line is interface-name+interface. |
5. Restore the default configuration of the voice subscriber line. | default | Optional. |
6. Tear down the voice subscriber line. | shutdown | Optional. Up by default. |