Configuring the jitter buffer
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter voice view. | voice-setup | N/A |
3. Enter voice dial program view. | dial-program | N/A |
4. Create a VoIP voice entity and enter VoIP voice entity view. | entity entity-number voip | N/A |
5. Set the operating mode of the jitter buffer to adaptive. | jitter-buffer mode adaptive | Optional. By default, the adaptive mode is disabled and the voice packets are not buffered. |
6. Set the operating parameters for the jitter buffer that operates in the adaptive mode. | jitter-buffer delay { initial milliseconds | maximum milliseconds } | Optional. By default, the initial buffering time is 30 milliseconds and the maximum buffering time is 160 milliseconds. |