Configuring out-of-band DTMF transmission in fast connection mode
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter voice view. | voice-setup | N/A |
3. Enter voice dial program view. | dial-program | N/A |
4. Enter VoIP voice entity view. | entity entity-number voip | N/A |
5. Enable fast connection. | fast-connect | Disabled by default. |
6. Configure out-of-band DTMF transmission. | outband h225 | Optional. Inband DTMF transmission by default. |
NOTE: In actual configuration, to implement the transparent transmission of DTMF digit, you need to perform configurations for the VoIP voice entity on the originating GW and the POTS voice entity on the terminating GW. The out-of-band transmission mode of the POTS voice entity should be identical with that of the VoIP voice entity. | ||