Configuring options related to dial plan

1. Enter system view.

system-view

N/A

2. Enter voice view.

voice-setup

N/A

3. Enter voice dial program view.

dial-program

N/A

4. Create a POTS voice entity and enter POTS voice entity view.

entity entity-number pots

N/A

5. Configure the calling number permitted to originate calls to the local voice entity.

caller-permit calling-string

Optional.

By default, no calling number is configured, that is, incoming calls are not restricted.

6. Configure the priority of the POTS voice entity.

priority priority-order

Optional.

By default, the priority level is 0.

The smaller the number, the higher the priority.

7. Configure a dial prefix.

dial-prefix string

Optional.

By default, no dial prefix is configured.

8. Configure the number sending mode.

send-number { digit-number | all | truncate }

Optional.

By default, the truncate mode is used, that is, numbers matching the wildcard dot (.) at the end will be sent.