Configuring a PVC application of X.25 over FR
X.25 over FR is an extension to X.25 switching, so you must enable X.25 switch first.
To configure a PVC application of X.25 over FR:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable X.25 switching. | x25 switching | Not enabled by default. |
3. Create an X.25 template. | x25 template { name } | N/A |
4. Specify the virtual circuit range. | x25 vc-range { bi-channel ltc htc [ out-channel loc hoc ] | in-channel lic hic [ bi-channel ltc htc ] [ out-channel loc hoc ] | out-channel loc hoc } | N/A |
5. Configure a PVC route under the X.25 template. | x25 switch pvc pvc-number1 interface interface-type interface-number [ dlci dlci-number ] pvc pvc-number2 [ option ] | N/A |
6. Return to system view. | quit | N/A |
7. Enter interface view. | interface interface-type interface-number | N/A |
8. Configure the link layer protocol as FR. | link-protocol fr [ ietf | nonstandard ] | PPP by default. |
9. Configure the FR interface type. | fr interface-type { dce | dte | nni } | DTE by default. |
10. Configure an FR DLCI and enter its view. | fr dlci dlci-number | N/A |
11. Configure the FR DLCI as Annex G DLCI. | annexg { dce | dte } | N/A |
12. Apply the X.25 Template to the Annex G DLCI. | x25-template name | N/A |
13. Enter interface view | interface interface-type interface-number | N/A |
14. Configure the link layer protocol as X.25 | link-protocol x25 [ dce |dte ] [ ietf | nonstandard ] | PPP by default. |
15. Configure a PVC route | x25 switch pvc pvc-number1 interface interface-type interface-number [ dlci dlci-number ] pvc pvc-number2 [ option ] | N/A |