Bridge routing configuration example
Network requirements
As shown in Figure 115, Ethernet 1/1 and Ethernet 1/2 belong to the same bridge set.
Configure bridge routing so traffic passing each interface in the bridge set can be routed.
Figure 115: Network diagram
![](images/image111.png)
Configuration procedure
<Router> system-view [Router] bridge enable [Router] bridge routing-enable [Router] bridge 1 enable [Router] bridge 1 routing ip [Router] interface ethernet 1/1 [Router-Ethernet1/1] bridge-set 1 [Router-Ethernet1/1] quit [Router] interface ethernet 1/2 [Router-Ethernet1/2] bridge-set 1 [Router-Ethernet1/2] quit [Router] interface bridge-template 1 [Router-Bridge-template1] ip address 1.1.1.1 255.255.0.0 [Router-Bridge-template1] quit [Router] interface ethernet 1/3 [Router-Ethernet1/3] ip address 2.1.1.1 255.255.0.0