Configuring an LAC to initiate tunneling requests for specified users
An LAC initiates tunneling requests only to specified LNSs for specified users. You can specify the users to be serviced and the LNSs that will be connected. Users can be specified by their fully qualified name or the domain name.
Up to five LNSs can be configured. The LAC initiates an L2TP tunneling request to its specified LNSs consecutively in their configuration order until it receives an acknowledgement from an LNS, which then becomes the tunnel peer.
To configure the LAC:
Step | Command |
---|---|
1. Enter system view. | system-view |
2. Enter L2TP group view. | l2tp-group group-number |
3. Enable the device to initiate tunneling requests to one or more IP addresses for one or more specified VPN users. | start l2tp { ip ip-address }&<1-5> { domain domain-name | fullusername user-name } |