Configuring IPoEoA
When you configure IPoEoA, follow these guidelines:
When multiple Layer 3 VE interfaces are connected through PVCs to a DHCP server that assigns IP addresses to the interfaces through static address binding, configure different MAC addresses for the interfaces by using the mac-address command.
In an IPoEoA application, Class Based Queuing (CBQ) should be configured on PVCs.
You can configure PVC mapping in PVC view. For information about the configuration, see HPE FlexNetwork MSR Router Series Comware 5 MPLS Configuration Guide.
To configure IPoEoA on a PVC:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a virtual Ethernet (VE) interface. | interface virtual-ethernet interface-number | Configure the IP address on a VE interface. It is invalid to configure the IP address on the ATM interface. |
3. Return to system view. | quit | N/A |
4. Enter ATM interface view. | interface atm { interface-number | interface-number.subnumber } | N/A |
5. Enable packet padding on the ATM interface. | eoapad enable | Optional. |
6. Create a PVC and enter its view. | pvc { pvc-name [ vpi/vci ] | vpi/vci } | N/A |
7. Configure an IPoEoA mapping on the PVC. | map bridge virtual-ethernet interface-number | N/A |