Checking PVC status to determine the protocol state of an ATM P2P subinterface
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create an ATM P2P subinterface and enter its view. | interface atm interface-number.subnumber p2p | By default, the subinterface is configured as point-to-multipoint (p2mp). |
3. Check PVC status in addition to physical interface status when determining the protocol state of the ATM P2P subinterface. | atm-link check | By default, the protocol state of an ATM P2P subinterface is consistent with the status of the physical interface. |