Configuring modem management
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter user interface view. | user-interface { first-num1 [ last-num1 ] | { aux | console | tty | vty } first-num2 [ last-num2 ] } | N/A |
3. Configure the call-in/call-out rights for the modem. | modem { both | call-in | call-out } | Modem call-in and call-out are denied by default. |
4. Set the maximum interval allowed between picking up the handset and dialing when a user tries to establish a connection. | modem timer answer time | Optional. 60 seconds by default. |
5. Enable the modem to obtain the caller number of the terminal. | modem caller-number resolve [ ata-waiting-time time ] | Optional. By default, the modem does not obtain the caller number when accepting a call from the terminal. This feature applies to only the POS terminal connected to an analog modem (AM) interface. |
6. Set modem answer mode. | Optional. Hewlett Packard Enterprise recommends not configuring this step. | |
7. Return to system view. | quit | N/A |
8. Configure modem through AT commands. | Optional. | |
9. Enable modem callback. | service modem-callback | Optional. Disabled by default. |