Configuration procedure
To configure DCC timers and buffer queue length on a dialup interface:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter dialup interface (physical or dialer interface) view. | interface interface-type interface-number | N/A |
3. Set the link idle-timeout timer. | dialer timer idle seconds | Optional. The default setting is 120 seconds. |
4. Set the holddown timer. | dialer timer enable seconds | Optional. The default setting is 5 seconds. |
5. Set the compete-idle timer. | dialer timer compete seconds | Optional. The default setting is 20 seconds. |
6. Set the wait-carrier timer. | dialer timer wait-carrier seconds | Optional. The default setting is 60 seconds. |
7. Set the buffer queue length. | dialer queue-length packets | Optional. By default, packets are not buffered. |
8. Set the intended bandwidth. | bandwidth bandwidth-value | Optional. |