Configuration procedure
To configure MP for DCC:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter dialer interface view. | interface dialer number | N/A |
3. Enable PPP on the dialer interface. | link-protocol ppp | N/A |
4. Enable MP. | ppp mp | By default, MP is disabled. |
5. Set link load thresholds. | dialer threshold traffic-percentage [ in-out | in | out ] | If the traffic-percentage argument is set to 0, DCC will bring up all available links when triggered. |
6. Set the upper limit of links in an MP bundle. | ppp mp max-bind max-bind-num | Optional. The default setting is 16. |
7. Set the lower limit of links in an MP bundle. | ppp mp min-bind min-bind-num | Optional. By default, the lower limit is 0, and DCC brings up links depending on traffic size. |