Configuration procedure

This example only covers MPoFR configuration. Routing and other features are beyond the scope of this example.

1. Configure Router A:

   # Create Virtual-Template 1 for PPPoFR and bind it to the MP template Virtual-Template 3.

   <RouterA> system-view
   [RouterA] interface virtual-template 1
   [RouterA-Virtual-Template1] ppp mp virtual-template 3
   [RouterA-Virtual-Template1] quit
   

   # Create Virtual-Template 2 for PPPoFR and bind it to the MP template Virtual-Template 3.

   [RouterA] interface virtual-template 2
   [RouterA-Virtual-Template2] ppp mp virtual-template 3
   [RouterA-Virtual-Template2] quit
   

   # Create and configure Virtual-Template 3.

   [RouterA] interface virtual-template 3
   [RouterA-Virtual-Template3] ppp mp lfi
   [RouterA-Virtual-Template3] qos max-bandwidth 64
   [RouterA-Virtual-Template3] ip address 1.1.6.1 255.255.255.0
   

   # Map DLCI 100 to Virtual-Template 1 and DLCI 200 to Virtual-Template 2 for PPPoFR on the frame relay interface Serial 2/0.

   [RouterA] interface serial 2/0
   [RouterA-Serial2/0] fr dlci 100
   [RouterA-fr-dlci-Serial2/0-100] quit
   [RouterA-Serial2/0] fr map ppp 100 interface virtual-template 1
   [RouterA-Serial2/0] fr dlci 200
   [RouterA-fr-dlci-Serial2/0-200] quit
   [RouterA-Serial2/0] fr map ppp 200 interface virtual-template 2
   

2. Configure Router B:

   # Create Virtual-Template 1 for PPPoFR and bind it to the MP template Virtual-Template 3.

   <RouterB> system-view
   [RouterB] interface Virtual-Template 1
   [RouterB-Virtual-Template1] ppp mp virtual-template 3
   [RouterB-Virtual-Template1] quit
   

   # Create Virtual-Template 2 for PPPoFR and bind it to the MP template Virtual-Template 3.

   [RouterB] interface Virtual-Template 2
   [RouterB-Virtual-Template2] ppp mp virtual-template 3
   [RouterB-Virtual-Template2] quit
   

   # Create and configure Virtual-Template 3.

   [RouterB] interface Virtual-Template 3
   [RouterB-Virtual-Template3] ppp mp lfi
   [RouterB-Virtual-Template3] qos max-bandwidth 64
   [RouterB-Virtual-Template3] ip address 1.1.6.2 255.255.255.0
   

   # Map DLCI 100 to Virtual-Template 1 and DLCI 200 to Virtual-Template 2 for PPPoFR on the frame relay interface Serial 2/0.

   [RouterB] interface serial 2/0
   [RouterB-Serial2/0] fr dlci 100
   [RouterB-fr-dlci-Serial2/0-100] quit
   [RouterB-Serial2/0] fr map ppp 100 interface virtual-template 1
   [RouterB-Serial2/0] fr dlci 200
   [RouterB-fr-dlci-Serial2/0-200] quit
   [RouterB-Serial2/0] fr map ppp 200 interface virtual-template 2