Configuration procedure
To configure PPPoFR:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a virtual template interface and the virtual template interface view. | interface virtual-template interface-number | N/A |
3. Assign IP address. | ip address ip-address { mask-length | mask } | N/A |
4. Return to system view. | quit | N/A |
5. Enter the frame relay interface view. | interface interface-type interface-number | N/A |
6. Enable frame relay on the interface. | link-protocol fr [ ietf | nonstandard ] | N/A |
7. Configure a frame relay DLCI. | fr dlci dlci-number | Optional for DTE side. |
8. Return to frame relay interface view. | quit | N/A |
9. Map frame relay DLCI to PPP. | fr map ppp dlci-number interface virtual-template interface-number | N/A |
When you configure a static route on a virtual-template interface, specify only the next hop. If you want to specify the outbound interface as well, make sure the physical interface bound to the virtual-template interface works correctly.