Configuration procedure
To configure FRF.9 compression:
Step | Command | Remarks | |
---|---|---|---|
1. Enter system view. | system-view | N/A | |
2. Enter frame relay interface or subinterface view. | interface interface-type interface-number or interface serial interface-number.subnumber | N/A | |
3. Configure FRF.9 compression (use either one according to interface type). | For P2P subinterface, enable FRF.9 compression. | fr compression frf9 | Optional. By default, FRF.9 compression is disabled. |
For a P2MP interface, enable FRF.9 compression when creating static address mapping. | fr map ip { ip-address [ mask ] | default } dlci-number [ broadcast | [ ietf | nonstandard ] ] * compression frf9 | Optional. |