Enabling the trap function
The trap function enables the frame relay module to report critical events to the information center. You can configure the information center to output interesting trap messages to a destination (for example, the console) for analysis. For more information about how to configure the information center, see HPE FlexNetwork MSR Router Series Comware 5 Network Management and Monitoring Configuration Guide.
To enable the trap function for the frame relay module:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable trap for frame relay. | snmp-agent trap enable fr | Optional. By default, trap is enabled for frame relay. |
For more information about the snmp-agent trap enable fr command, see HPE FlexNetwork MSR Router Series Comware 5 Network Management and Monitoring Command Reference.