Configuring basic DTE side frame relay

1. Enter system view.

system-view

N/A

2. Enter the view of the interface connecting to the Frame Relay network.

interface interface-type interface-number

N/A

3. Enable frame relay on the interface.

link-protocol fr [ ietf | nonstandard ]

The default link layer protocol of a WAN interface is PPP.

4. Set the frame relay interface type to DTE.

fr interface-type dte

Optional.

The default setting is DTE.

5. Configure frame relay LMI protocol type.

fr lmi type { ansi | nonstandard | q933a | bi-direction }

Optional.

The default setting is q933a.

Support for the bi-direction keyword varies with device models.

6. Configure DTE side N391.

fr lmi n391dte n391-value

Optional.

The default setting is 6.

7. Configure DTE side N392.

fr lmi n392dte n392-value

Optional.

The default setting is 3.

8. Configure DTE side N393.

fr lmi n393dte n393-value

Optional.

The default setting is 4.

9. Configure DTE side T391.

timer hold seconds

Optional.

The default setting is 10 seconds.