Frame relay configuration task list

Task		Remarks
Configuring DTE side frame relay	Configuring basic DTE side frame relay	Required
	Configuring frame relay address mappings	Required
	Configuring a frame relay local virtual circuit	Required
	Configuring a frame relay subinterface	Optional
	Configuring Annex G	Optional
	Marking the DE bit	Optional
	Configuring frame relay fragmentation	Optional
Configuring DCE side frame relay	Configuring basic DCE side frame relay	Required
	Configuring frame relay address mapping on the DCE side	Required
	Configuring frame relay local virtual circuit on the DCE side	Required
	Configuring frame relay subinterface on the DCE side	Optional
	Configuring frame relay switching	Optional
	Configuring frame relay over IP	Optional
	Configuring Annex G	Optional
	Marking the DE bit	Optional
	Configuring frame relay fragmentation	Optional
Enabling the trap function		Optional

You can configure an NNI interface in the same way a DCE interface is configured. For the configuration procedure, see "Configuring DCE side frame relay."

If one endpoint of a link is an NNI interface, the peer endpoint must also be an NNI interface.

prev	up	next
Hardware compatibility with frame relay	home	Configuring DTE side frame relay