Enabling the trap function
To learn about events that occur on the ISDN module, you can enable the trap function for ISDN. When events occur on the ISDN module, traps will be sent to the information center. You can configure the information center to output the trap information matches certain criteria to a desired destination (the console for example) for analysis. For information about how to configure the information center, see HPE FlexNetwork MSR Router Series Comware 5 Network Management and Monitoring Configuration Guide.
To enable the trap function:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable the trap function for the ISDN module. | snmp-agent trap enable isdn [ call-clear | call-setup | lapd-status ] | Optional. Enabled by default. |
For more information about the snmp-agent trap enable isdn command, see HPE FlexNetwork MSR Router Series Comware 5 Network Management and Monitoring Command Reference.