Configuring Stac LZS compression
Stac LZS compression is a link layer data compression standard developed by Stac Electronics. Stac LZS is a Lempel-Ziv-based algorithm compressing only packet payloads. It replaces a continuous data flow with binary codes that can accommodate to the change of data. Though allowing for more flexibility, this requires more CPU resources.
To configure Stac LZS compression:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Enable Stac LZS compression. | ppp compression stac-lzs | By default, Stac LZS compression is disabled. Stac LZS compression takes effect on a link only after you enable Stac LZS compression at both ends of the link. Outbound expedite forwarding is not supported on links with Stac-LZS compression enabled. Disable outbound expedite forwarding before performing this configuration. |